Installation Instructions: Morimoto Nissan 370Z: XB LED Headlights

Installation Instructions: Morimoto Nissan 370Z: XB LED Headlights

Installing the Morimoto Nissan 370Z: XB LED Headlights requires intermediate to advanced automotive knowledge and tools. Please note that the following steps provide a general overview of the installation process, and it is crucial to follow the specific instructions provided by Morimoto for accurate and safe installation. If you are not experienced with automotive installations, it is recommended to seek the assistance of a professional mechanic or automotive specialist.

Tools Needed:

• Car jack and jack stands or ramps
• Socket set
• Wrench set
• Torque wrench
• Trim panel removal tool (optional)
• Safety goggles and gloves
• Penetrating oil (to loosen rusted bolts)

Installation Steps:

1. Safety Precautions:. Park your vehicle on a flat and level surface, engage the parking brake, and ensure the engine is cool before beginning the installation.

2. Disconnect the Battery:. Start by disconnecting the negative terminal of the vehicle’s battery to prevent any electrical mishaps during the installation.
3. Raise the Vehicle:. Use a car jack and jack stands or ramps to lift the front of the vehicle off the ground, providing enough space to work underneath.
4. Remove the Old Headlights:. Carefully remove any trim panels or covers that may obstruct access to the headlights. Use a socket set and wrench to unbolt and disconnect the old headlights from their mounting points.
5. Disconnect Wiring and Connectors:. Gently disconnect the wiring harnesses and connectors from the old headlights. Be cautious not to damage any wires during this process.
6. Prepare the Morimoto XB LED Headlights:. Before installing the new headlights, check that all necessary components are included, and ensure the headlights are properly aligned for installation.
7. Install the Morimoto XB LED Headlights:. Carefully position the Morimoto XB LED Headlights into place, aligning them with the vehicle’s existing mounting points. Connect the wiring harnesses and connectors to the new headlights.

8. Secure the Headlights:. Use the provided hardware to secure the Morimoto XB LED Headlights in place. Gradually tighten the bolts and nuts, working in a crisscross pattern to ensure even pressure. Use a torque wrench to tighten the bolts to the manufacturer’s recommended torque specifications.

9. Reattach Trim Panels:. Once the headlights are securely installed, reattach any trim panels or covers that were removed earlier.
10. Lower the Vehicle:. Carefully lower the vehicle back to the ground using the car jack and jack stands or ramps.
11. Test the Headlights:. Reconnect the vehicle’s battery and test the Morimoto XB LED Headlights to ensure they function correctly. Check for proper alignment and adjust if necessary.
12. Professional Headlight Alignment (Optional):. For the best lighting performance, consider getting a professional headlight alignment to ensure the headlights are properly aimed.

Always refer to the manufacturer’s specific instructions and guidelines provided with the Morimoto Nissan 370Z: XB LED Headlights for the safest and most effective installation process.