Name: CAMSHAFT NISSAN VQ35DE / HR PROCAM (IN,EX comes as 2 cams per side)
SKU: 11963
Price: 374.00 USD
Availability: InStock

CAMSHAFT NISSAN VQ35DE / HR PROCAM (IN,EX comes as 2 cams per side)

$374.00

ENGINE	APPLICATION	DURATION	MAX CAM LIFT (mm)	IN/EX	MAX VALVE LIFT (mm)	COLD VALVE CLEARANCE (mm)【±0.01】	VALVE TIMING CENTER LINE (Deg)	BASE CIRCLE	PART NUMBER	MSRP (USD)
VQ35DE EARLY (-05.01)	Z33/ V35 4Dr/2Dr MT	256°	10.20	IN	9.90	IN 0.30 EX 0.33	IN 125 EX 112	Φ35.4	142015	$440.00
		256°	10.20	EX	9.87				142016
		264°	10.50	IN	10.20				142017
		264°		EX	10.17				142018
		272°		IN	10.20				142029
				EX	10.17				142030
			11.30	IN	11.00				142025
			11.00	EX	10.67				142026
		280°	11.30	IN	11.00				142027
		280°	11.00	EX	10.67				142028
VQ35DE LATE (-07.01)	Z33 MT	264°	10.80	IN	10.50	IN 0.30 EX 0.33	IN 125 EX 126		142031
		264°		EX	10.47				142032
		272°		IN	10.50				142033
				EX	10.47				142034
			11.30	IN	11.00				142035
			11.00	EX	10.67				142036
		280°	11.30	IN	11.00				142037
		280°	11.00	EX	10.67				142038
VQ35HR	Z33 MT	264°	10.80	IN	10.50	IN 0.30 EX 0.33	IN 122 EX 124		142039
		264°		EX	10.47				142040
		272°		IN	10.50				142041
				EX	10.47				142042
			11.30	IN	11.00				142043
			11.00	EX	10.67				142044
		280°	11.30	IN	11.00				142045
		280°	11.00	EX	10.67				142046

Spec.

DURATION (Deg)	MAX CAM LIFT (mm)	IN/EX	MAX VALVE LIFT (mm)	COLD VALVE CLEARANCE （mm）［±0.01］	VALVE TIMING CENTERLINE (Deg)	BASE CIRCLE
256	10.20	IN	9.90	0.30	125	Φ35.4
256	10.20	EX	9.87	0.33	112
264	10.50	IN	10.20	0.30	125
264	10.50	EX	10.17	0.33	112
272	10.50	IN	10.20	0.30	125
	10.50	EX	10.17	0.33	112
	11.30	IN	11.00	0.30	125
	11.00	EX	10.67	0.33	112
280	11.30	IN	11.00	0.30	125
280	11.00	EX	10.67	0.33	112

PLEASE NOTE

Upgrading the Valve Springs is required when using Camshafts with Cam Lift greater than 11.0mm (sold separately).

When using Camshafts with Cam lift greater than 11.0mm on the intake side there is a chance that the valves can come into contact with the piston when the eVTC advances the timing. In this case it is highly recommended to recess the pistons to guarantee adequate clearance.
Example: The standard advance amount with the stock head and stock pistons with the eVTC will require approximately 1mm valve recess on the piston.