Installation Instruction: Mishimoto 2016+ Infiniti Q50/60 3.0T Performance Air-To-Water Intercooler Kit

Mishimoto 2016+ Infiniti Q50/60 3.0T Performance Air-To-Water Intercooler Kit

As an AI language model, I can provide you with general instructions on how to install a Mishimoto 2016+ Infiniti Q50/60 3.0T Performance Air-To-Water Intercooler Kit. However, it’s important to note that specific installation steps may vary depending on the exact make and model of your vehicle. Always refer to the manufacturer’s installation instructions and guidelines for the most accurate and up-to-date information. Here is a general outline of the steps involved in installing a performance air-to-water intercooler kit:

Tools and equipment you may need:

• Socket set and wrenches
• Screwdrivers
• Pliers
• Hose clamps
• Silicone hoses
• Coolant
• Replacement coolant reservoir (if needed)
• Intercooler pump (if included in the kit)
• Installation instructions from Mishimoto (if provided)

1: Preparation

• Disconnect the negative terminal of the vehicle’s battery to avoid any electrical mishaps during the installation.

2: Removing the stock intercooler

• Locate the stock intercooler, which is usually mounted near the front of the engine.
• Carefully remove any components that obstruct access to the intercooler, such as the bumper, grille, and air ducts.
• Disconnect all hoses and clamps connected to the stock intercooler.
• Carefully remove the stock intercooler from the vehicle.

3: Install the new intercooler

• Follow the manufacturer’s instructions to install the new Mishimoto intercooler in the reverse order of removing the stock intercooler.
• Secure the intercooler using the appropriate mounting brackets or hardware.
• Attach the silicone hoses provided in the kit to connect the intercooler to the intake and turbocharger.
• Tighten all hose clamps securely to avoid any leaks.

4: Intercooler pump installation (if applicable)

• If your Mishimoto kit includes an intercooler pump, follow the provided instructions to install it in the appropriate location.
• Connect the pump to the intercooler and ensure all electrical connections are secure.

5: Reinstall components

• Reinstall any components that were removed during the stock intercooler removal process, such as the bumper, grille, and air ducts.

6: Refill the coolant system

• If the installation required draining the coolant, refill the coolant system with the appropriate coolant according to the manufacturer’s specifications.
• Check for any coolant leaks and fix them if necessary.

7: Final checks

• Double-check all connections and hoses to ensure everything is properly secured.
• Reconnect the negative terminal of the vehicle’s battery.

 8: Test the intercooler

• Start the engine and let it idle for a few minutes.
• Check for any signs of coolant leaks or abnormal noises.
• Take the vehicle for a test drive, paying attention to the intercooler’s performance and the vehicle’s overall engine response.

Again, please note that these are general guidelines, and the specific steps for installing the Mishimoto intercooler kit on your 2016+ Infiniti Q50/60 3.0T may differ. Always refer to the manufacturer’s instructions and seek professional help if you are not confident in performing the installation yourself.