Installation Instructions: Spyder Nissan 350Z 03-05 Euro Style Tail Lights Black

Spyder Nissan 350Z 03-05 Euro Style Tail Lights Black

Installing the Spyder Nissan 350Z 03-05 Euro Style Tail Lights in Black is a relatively straightforward process and can be done with basic tools and some automotive knowledge. Here is a general guide on how to install these tail lights:

Tools Needed:

  • Screwdriver set
  • Trim panel removal tool (optional)
  • Socket set
  • Ratchet

Installation Steps:

  1. Safety Precautions:. Park your Nissan 350Z on a flat surface and engage the parking brake. Ensure the engine is off and the vehicle is cool before starting the installation.
  2. Disconnect the Battery:. For safety purposes, disconnect the negative terminal of your vehicle’s battery to prevent any electrical mishaps during the installation.

  3. Remove the Factory Tail Lights:. Open the trunk of your Nissan 350Z and locate the access panels on the inside of the trunk liner, directly behind the tail lights. Remove these panels using a screwdriver or trim panel removal tool to access the tail light mounting nuts.
  4. Unbolt the Tail Lights:. Use a socket set and ratchet to remove the mounting nuts securing the factory tail lights. Carefully pull the tail lights away from the vehicle’s body.
  5. Disconnect Wiring:. Once the tail lights are free, disconnect the wiring harnesses and bulbs from the factory tail lights. Note the arrangement of the wires to ensure correct reconnection later.
  6. Install the Spyder Euro Style Tail Lights:. Position the Spyder Euro Style Tail Lights in place, aligning the mounting holes with those on the vehicle’s body. Connect the wiring harnesses and bulbs to the new tail lights.

  7. Secure the Tail Lights:. Use the provided hardware to secure the Spyder Euro Style Tail Lights in place. Gradually tighten the mounting nuts, ensuring an even and snug fit.
  8. Reassemble Access Panels:. Once the new tail lights are securely in place, reattach the access panels on the inside of the trunk liner.
  9. Test the Tail Lights:. Reconnect the negative terminal of the vehicle’s battery. Test the new tail lights to ensure all functions, such as brake lights, turn signals, and reverse lights, are working correctly.
  10. Adjustment (if necessary):. If the tail lights require any adjustment for alignment, follow the adjustment instructions provided by Spyder.
  11. Final Inspection:. Double-check all connections, nuts, and bolts to ensure everything is securely installed. Make sure there are no loose or exposed wires.

  12. Complete the Installation:. Close the trunk, and you’re all set! Enjoy the refreshed look and improved visibility of your Nissan 350Z with the Spyder Euro Style Tail Lights in Black.

Always refer to the specific installation instructions provided by Spyder for the most accurate and detailed guidance during the installation process. If you are unsure about any step, it is recommended to seek the assistance of a professional mechanic or automotive specialist.

Leave a Reply