Installation Instruction: BC Racing Suspension ER Coilovers Nissan Fairlady Z/370Z Z34 09-

BC Racing Suspension ER Coilovers Nissan Fairlady Z/370Z Z34 09-

Installing the BC Racing Suspension ER Coilovers on the Nissan Fairlady Z/370Z Z34 09- requires careful attention to detail and precise execution. While I can provide you with a general overview, it’s essential to consult the specific installation instructions provided by BC Racing for your coilover model. If you’re unsure or uncomfortable with the installation process, it’s recommended to seek assistance from a professional mechanic or automotive specialist.

Here is a general outline of the installation process:

1. Ensure the vehicle is parked on a level surface and the engine is cool before starting the installation.
2. Safely lift the Nissan Fairlady Z/370Z Z34 09- using a jack and securely support it with jack stands. Make sure to follow proper safety procedures.
3. Start with one corner of the vehicle and locate the stock suspension components that need to be removed. This typically includes the factory shocks, springs, and upper mounts.
4. Begin by removing any bolts or fasteners securing the stock suspension components. It may be necessary to use penetrating oil to loosen any rusted or stubborn connections.
5. Carefully remove the stock suspension components, starting with the shocks and then the springs. Take note of the orientation and positioning of the removed components for reference during installation.
6. With the stock suspension removed. Inspect the BC Racing Suspension ER Coilovers to ensure everything is included and in good condition.
7. Begin the installation by attaching the BC Racing Suspension ER Coilovers in the reverse order of removal. Start with the springs and then install the shocks, making sure they are properly aligned and seated in their designated locations.
8. Use the appropriate hardware provided by BC Racing to secure the coilovers in place. Follow the provided torque specifications to ensure proper tightening.
9. Repeat the installation process for each corner of the vehicle. Taking care to install the coilovers in the correct orientation and following the same steps for each corner.
10. Once all the coilovers are installed, lower the vehicle back to the ground and make sure it sits evenly and at the desired ride height.