Installation Instructions: G35 Exhaust Motordyne ShockWave TDX2

G35 Exhaust Motordyne ShockWave TDX2

Installing the Motordyne ShockWave TDX2 Exhaust on the Infiniti G35 requires careful attention to detail and precise execution. While I can provide you with a general overview, it’s essential to consult the specific installation instructions provided by Motordyne for your exhaust system.

Here is a general outline of the installation process:

1. Ensure the vehicle is parked on a level surface and the engine is cool before starting the installation.
2. Safely lift the Infiniti G35 using a jack and securely support it with jack stands. Make sure to follow proper safety procedures.
3. Locate the stock exhaust system on the Infiniti G35 and inspect the components that need to be removed. This typically includes the stock mufflers, resonators, and exhaust piping.
4. Begin by removing any bolts or clamps connecting the stock exhaust components. It may be necessary to use penetrating oil to loosen any rusted or stubborn connections.
5. Carefully remove the stock exhaust components, starting from the rear of the vehicle and working your way towards the front. Take note of the orientation and positioning of the removed components for reference during installation.
6. With the stock exhaust removed, inspect the Motordyne ShockWave TDX2 Exhaust
7. Begin the installation by attaching the Motordyne ShockWave TDX2 Exhaust components in the reverse order of removal. Start from the front of the vehicle and work your way towards the rear, connecting the exhaust piping, resonators, and mufflers according to the provided instructions.
8. Use the appropriate bolts, clamps, or other hardware provided by Motordyne to secure the exhaust components in place. Double-check all connections and make sure there are no gaps or leaks in the exhaust system.
9. Lower the vehicle back to the ground and start the engine. Listen for any unusual sounds or leaks, and inspect the exhaust system for proper fitment and alignment